| PART |
Description |
Maker |
| RIF-0-OPT-24DC |
Pre-assembled solid-state relay module with push-in connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 3 - 33 V DC/3 A
|
PHOENIX CONTACT
|
| CMRA4835 CMRD4855 |
IC,Normally-Open Panel-Mount Solid-State Relay,1-CHANNEL,M:HL089HD4.3 TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX
Solid-State DIN Rail Mount Relay; Contacts:SPST-NO; Output Device:SCR; Output Voltage Max:530Vrms; Output Voltage Min:48Vrms; Control Voltage Max:32VDC; Control Voltage Min:4VDC; Load Current Max:55A; Switching:Zero Cross RoHS Compliant: Yes
|
Crydom, Inc.
CRYDOM CORP
|
| TX2-12V |
TX-relay. 2 Amp. High capacity relay with high surge voltage & high breakdown voltage. Standard PC board terminal. Single side stable. Nominal voltage 12 V DC.
|
Panasonic / NAiS
|
| VND05BSP VND05 VND05BSP13TR -VND05BSP |
CAPACITOR, CLASS Y2 4.7NFCAPACITOR, CLASS Y2 4.7NF; Capacitance:4.7nF; Voltage rating, AC:250V; Voltage rating, DC:2500V; Capacitor dielectric type:Polypropylene; Series:B81122; Tolerance, :20%; Tolerance, -:20%; Temp, op.
ISO HIGH SIDE SMART POWER SOLID STATE RELAY
DOUBLE CHANNEL HIGH SIDE SMART POWER SOLID STATE RELAY
|
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| IL356 |
From old datasheet system
HIGH VOLTAGE SOLID STATE RELAY OPTOCOUPLER
HIGH VOLTAGE SOLID STATE RELA OPTOCOUPLER
|
SIEMENS[Siemens Semiconductor Group]
Infineon
|
| LH1061AB LH1061AAC |
High-Voltage, Solid-State Relay
|
SIEMENS[Siemens Semiconductor Group]
|
| KAQY217 |
HIGH VOLTAGE SOLID STATE RELAY - MOSFET OUTPUT
|
COSMO Electronics Corporation
|
| KAQY217S |
High Voltage, Solid State Relay-MOSFET Output
|
COSMO[COSMO Electronics Corporation]
|
| KAQV217S |
High Voltage, Solid State Relay-MOSFET Output
|
COSMO[COSMO Electronics Corporation]
|
| PS7341-1A PS7341-1A-A PS7341L-1A-E3-A PS7341L-1A-E |
6-PIN DIP, HIGH ISOLATION VOLTAGE 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX
|
NEC
|
| PLC-BSC-5DC |
6.2 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 5 V DC
|
PHOENIX CONTACT
|
